Wednesday, February 13, 2008

CATIA Tutorial - FEA:Mechanism And Animation:Free Video Tutorial

The objective of this tutorial book is to expose the reader to the basic FEA capabilities in CATIA V5. The chapters are designed to be independent of each other allowing the user to pick specific topics without the need to go through the previous chapters. However, the best strategy to learn is to sequentially cover the chapters.

In this workbook, the parts created in CATIA are simple enough that can be modeled with minimal knowledge of this powerful software. The reason behind the simplicity is not to burden the reader with the CAD aspects of package.
However, it is assumed that the user is familiar with CATIA V5 interface and basic utilities such as pan, zoom, and rotation.

The tutorials are based on releases 12 and 13; however, other releases can also be used with minor changes. Typically, the differences are not even noticed by a beginner. The workbook was developed using CATIA in a windows XP environment. Nevertheless, it can be used for NT and UNIX platforms without any changes.

Chapters

  1. Introduction (Available)
  2. Analysis of a Bent Rod with Solid Elements (Available)
  3. Axially Loaded Block with Stress Concentration
  4. Stress Analysis of a Rotating Disk
  5. Deformation of an I-beam under Self-weight
  6. C-clamp Deformed with Enforced Displacement
  7. FEA Modeling of the Bent Rod with Beam Elements
  8. Beam Elements under Enforced Displacement
  9. Bending of a Notched Specimen with Smooth Virtual Part
  10. Analyzing a Loaded Bracket with Shell Elements, Surface Extraction Approach
  11. Modeling Mismatch in Shell Thickness and Surface Mesh
  12. Analysis of Thin Walled Pressure Vessel using Shell Elements
  13. Using the "Surface Mesher" to Simplify Geometry
  14. Analysis of a Tensile Specimen as an Assembly
  15. FE Model of a Bearing-Shaft Assembly using Analysis Connection
  16. Shrink Fit Analysis
  17. Analysis of a Fastened Assembly
  18. Thermal Stresses in a Bi-metallic Strip
  19. Hybrid Mesh Analysis
  20. Spring Elements
  21. Adaptive Refinement
  22. Free Vibration of a Simply Supported Beam
  23. Buckling Analysis
  24. A Simple Spot Weld Analysis
    Appendix I, Toolbar and Icon Guide

However All this Topics are available only when you buy book from SDC Publication, Here I have attached the free sample Tutorial for the following categories:

CATIA V5 Tutorials - Mechanism Design & Animation

CATIA V5 Tutorials  - FEA Tutorials

CATIA V5 Tutorials - Tutorial for Beginner and Advanced User

CATIA V5 Tutorials - List of CATIA Video Tutorials Free Download

Note: If you find any useful Tutorial for CATIA and other CAD/CAE software's please share with us.

Technorati Tags: ,

 

0 Comments: